Being a fan of earrings somehow requires us to keep collecting new design of earrings. If you are currently in the need of getting a new one, don’t shop! You can make your own earring. All you need is simply wire and few basic jewelry making tools. The steps to make it are also only few. The design of...
Before starting the project, prepare the following supplies:
Ring mandrel or anything similarFlush cutterChain nose pliersRound nose pliers10mm Swarovski pearl4mm small wire for binding1mm wire for the ring
Step 1. Take 1mm wire and cut it for about 10cm long. Then, use the round nose pliers to clench the wire end. Roll this wire end circling the pliers’ jaws until the...
While beaded necklace is already cool as it is, some people are even going overboard by adding animal horn between the beads. It is a popular tribal and bohemian look while the horn doesn’t necessarily have to be real animal horn. You can actually find beads that look identical with real animal horn. This project will show you how...
Today’s project is to make a simple bracelet from a leather cord and a coin. The steps are easy to follow. Furthermore, the materials and tools needed for this project can be easily found. The bracelet is later on easy to adjust. The bracelet can be made for any wrist depending on the length of the leather cord that...
This ring looks good and it appears that it is easy to make as well. You may need to prepare more materials than usual, but it takes a flash to make it nicely. Follow these steps below.
Materials:
MarkerWire cutterCopper wire sized 20 gauge (ring no.1, no.2 and no.5)Gold copper wire sized 18 gauge (ring no.3)Silver copper wire sized 18 gauge...
Step 1. Before starting the project, it is better to prepare the materials first. What you need to prepare for this handmade infinity bracelet are:
2-3 jump rings1 lobster clasp2 ribbon crimp clamps1 arm length of cotton cord sized 1 mm in beige1 arm length of cotton cord sized 1 mm in cream1 arm length of cotton cord sized 1...
There are some tools and method you can use in making jewelry, one of them is using wigjig. Wigjig is a tool used for bending the wire to form a certain pattern. This wigjig is used to replace the use of the round nose pliers since it will be helpful to maintain the pattern of it.
Materials
WigjigWireJeweler’s blocksLeatherRound nose pliers
The...
While most gold ring presents elegance in the same way, shiny and smooth surface, it is a new trend for a man to wear a gold ring that has oxidized brushed brass on some part of the ring. While it looks rustic, some people find it majestic, like you inherit it from a long royal blood line. Check out...
A Chain Necklace with Pretty Drilled Sea Glass
Step 1. The materials and the tools for this project.
Materials:
Paper clipGerman jewelry wire, or small silver, or large jump ringChain necklaceCup of waterSmall plastic bowlSea glass with 1/4” thickness
Tools:
Safety glassesRound nose pliersWire cuttersDentist driill bitsDremel
Step 2. Take the sea glass and place it in the bottom of the bowl. Then, pour the...
General Information:
Several people think that making cluster bracelet is complicated. The process does take long time to complete but the procedure actually includes simple steps. So, get rid of any tutorial with confusing steps! You have the simplest guidance that could help you to cut the completion time. As for the color, the following project is inspired by the...